Archive

Archive for February, 2012

x264 rev2164+649 tMod v2 ( Yet Another AutoVAQ mod )

7th February 2012, Tuesday 4 comments

Sources on GitHub: https://github.com/astrataro/x264_tMod.

Use win32thread and fprofiled:

tMod/tMod-10bit/tMod+MixAQ/tMod+OreAQ:
Download:
x264_rev2164+643_tMod-v2.7z: MediaFireGitHubnmm-hd
x264_rev2164+643_tMod-v2-Special_offer.7z: MediaFireGitHubnmm-hd

Latest updates:
– Updated BugMaster’s new aq-mode patch. AQ-mode=3 was untouched, and added AQ-mode=4 as another AutoVAQ experimental mod.
– See other changes of rev2164+649 tMod here.
– Stopped using –enable-lto any more. lto should make binaries faster in most cases, but not for x264.
– (Old change) Added a “Special-offer” build which disabled interlaced/lavf/swscale/ffms/audio-encode, should be faster according to some test.

—– How to load subtitles internally –—
These builds ported subtitles video-filter from direct264, and are able to render subtitles internally.
To render subtitles in this way, demuxer must be libav/ffms. Raw/avs demuxer is not supported for now. And VSFilter.dll(for 32-bit builds) or VSFilter64.dll(for 64-bit builds) must be placed together with the x264 binary or in the system path. Do NOT change filenames of them.
Rendering multiple subtitles is possible. Now you can render at most 16 subtitles simultaneously by calling –sub for each subtitles. Note that the later calling of –sub overlays the subtitles after previous calling of –sub, so if several subtitles are in the same position, the last one should overlays on all those rendered before.
The VSFilters are modified to add custom csri API. Patches can be found in svn of direct264 project. Therefore do NOT replace them with other builds. BT.709/BT.601 is auto detected according to video resolution. For HD videos BT.709 is used and for SD videos BT.601 is used.
Both 8-bit and 10-bit builds can use subtitles rendering, but rendering always takes place in 8-bit colorspaces.
The commandline example to render subtitles:
x264_32_tMod-8bit-420.exe –sub “subtitles-1.ass” –sub “subtitles-2.ass” –sub “subtitles-3.ass” –video-filter subtitles[/Other video filters] [Other x264 options] –output “output.mp4″ “input.mkv”

Patches:

–—––—–Download(L-Smash not included): patches-rev2164-v2.7z, nmm-hd-Mirror

00:L-Smash(including audio encoding);
01:More detailed version head
02:Add back “touhou” tune
03:Film Grain Optimization
04:Fade Compensation
05:Remove stats before renaming
06:Add a parameter to set level of writing options in User Data Unregistered SEI
07:Utilize internal threading in lavf/ffms
08:Auto VBV settings
09:AVI output
10:filters hqdn3d pad vflip yadif patch
11:Log file
12:Encoding time
13:Level force
14:Profile force
16:New experimental AQ mode (modification of Auto-variance AQ) (Update!!)
17:Print video info with lavf/ffms demuxer
18:lto & Ofast
19:AviSynth 16bit hack
20:Skip bit depth filter when possible
21:Video filter: subtitles
22:Detect color matrix with lavf/ffms demuxer
23:Fix AviSynth color space converting matrix
24:High-precision fps
25:Unofficial –device
26:More detailed “zones” help
27-1:MixAQ-core;(only in tMod+MixAQ version, remove AQDebug)
27-2:OreAQ-core.(only in tMod+OreAQ version, remove AQDebug)

Compiler:
mingw-gcc 4.6.2

Libpack info:
libav-v0.8-318-git-r32124(37390d5)
ffms svn-r643
VSFilter svn-r3698 (MPC-HC)
lame 3.99-4
libvorbis-aotuv_b6.03 (libvorbis-1.3.2)
opencore-amr-0.1.2 r178 git-08d6986
vo-aacenc-v0.1.1-13-g16df867
vo-amrwbenc-v0.1.1-10-gce23fb5
faac 1.28
qtsdk 7.3

—————————————————-
My other tools list ( including some of the x264 builds ) : MediaFire

Categories: encode, x264, x264-bin

x264 rev2164+649 tMod

5th February 2012, Sunday 8 comments

Sources on GitHub: https://github.com/astrataro/x264_tMod.

Use win32thread and fprofiled:

tMod/tMod-10bit/tMod+MixAQ/tMod+OreAQ:
Download:
 x264_rev2164+643_tMod.7z: MediaFireGitHubnmm-hd
 x264_rev2164+643_tMod-Special_offer.7z: MediaFireGitHubnmm-hd

Latest updates:
– Updated x264 to git-rev2164.
– Temporarily disabled avi-output. libav changed its APIs which were used in avi-output patch.
– Removed “Correct the limited-range 8->10 conversion algorithm” patch, x264 officially changed to fixed algorithm. However, now x264 uses shifting for both limited and full range, while the previous patch only used shifting for limited range. There is no clear standard document about full range 8->10 conversion, so if you prefer other algorithms, do it by yourself in avisynth and use –input-depth 10, so that my build will skip internal shifting/dithering.
– Updated lib packs ( libav/ffms/lame/vo-aacenc/vo-amrwbenc ).
– Added a “Special-offer” build which disabled interlaced/lavf/swscale/ffms/audio-encode, should be faster according to some test.

—– How to load subtitles internally –—
   These builds ported subtitles video-filter from direct264, and are able to render subtitles internally.
   To render subtitles in this way, demuxer must be libav/ffms. Raw/avs demuxer is not supported for now. And VSFilter.dll(for 32-bit builds) or VSFilter64.dll(for 64-bit builds) must be placed together with the x264 binary or in the system path. Do NOT change filenames of them.
   Rendering multiple subtitles is possible. Now you can render at most 16 subtitles simultaneously by calling –sub for each subtitles. Note that the later calling of –sub overlays the subtitles after previous calling of –sub, so if several subtitles are in the same position, the last one should overlays on all those rendered before.
   The VSFilters are modified to add custom csri API. Patches can be found in svn of direct264 project. Therefore do NOT replace them with other builds. BT.709/BT.601 is auto detected according to video resolution. For HD videos BT.709 is used and for SD videos BT.601 is used.
   Both 8-bit and 10-bit builds can use subtitles rendering, but rendering always takes place in 8-bit colorspaces.
   The commandline example to render subtitles:
x264_32_tMod-8bit-420.exe –sub “subtitles-1.ass” –sub “subtitles-2.ass” –sub “subtitles-3.ass” –video-filter subtitles[/Other video filters] [Other x264 options] –output “output.mp4″ “input.mkv”

Patches:

–—––—–Download(L-Smash not included): patches-rev2164.7znmm-hd-Mirror

00:L-Smash(including audio encoding);
01:More detailed version head
02:Add back “touhou” tune
03:Film Grain Optimization
04:Fade Compensation
05:Remove stats before renaming
06:Add a parameter to set level of writing options in User Data Unregistered SEI
07:Utilize internal threading in lavf/ffms
08:Auto VBV settings
09:AVI output
10:filters hqdn3d pad vflip yadif patch
11:Log file
12:Encoding time
13:Level force
14:Profile force
16:New experimental AQ mode (modification of Auto-variance AQ)
17:Print video info with lavf/ffms demuxer
18:lto & Ofast
19:AviSynth 16bit hack
20:Skip bit depth filter when possible
21:Video filter: subtitles
22:Detect color matrix with lavf/ffms demuxer
23:Fix AviSynth color space converting matrix
24:High-precision fps
25:Unofficial –device
26:More detailed “zones” help
27-1:MixAQ-core;(only in tMod+MixAQ version, remove AQDebug)
27-2:OreAQ-core.(only in tMod+OreAQ version, remove AQDebug)

Compiler:
mingw-gcc 4.6.2

Libpack info:
libav-v0.8-291-git-r32097(6f1a5e8)
ffms svn-r643
VSFilter svn-r3698 (MPC-HC)
lame 3.99-4
libvorbis-aotuv_b6.03 (libvorbis-1.3.2)
opencore-amr-0.1.2 r178 git-08d6986
vo-aacenc-v0.1.1-13-g16df867
vo-amrwbenc-v0.1.1-10-gce23fb5
faac 1.28
qtsdk 7.3

—————————————————-
My other tools list ( including some of the x264 builds ) : MediaFire

Categories: encode, x264, x264-bin